Home > Motorcycle > Motorcycle Helmets > Helmet Parts
Sort By:
Page of 1
Biltwell Helmet Hardware Kit- Black Screw Biltwell Helmet Hardware Kit- SS Screw Biltwell Lane Splitter Chin Spoiler

Description

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colors so you can fine-tune the look of your lid.

Technical Details

  • Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
  • Stamped alloy washers with anodized finish
  • Stainless steel screws feature thread lock compound already applied
  • Each kit includes two screws and two washers

Care and Maintenance

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Description

Sometimes subtle details are the loudest custom statement you can make. Our hardware kits for Gringo S and Lane Splitter shields come in stainless steel screws and anodized washer colors so you can fine-tune the look of your lid.

Technical Details

  • Kits fit Gringo S and Lane Splitter helmets to compliment or replace stock components
  • Stamped alloy washers with anodized finish
  • Stainless steel screws feature thread lock compound already applied
  • Each kit includes two screws and two washers

Care and Maintenance

Apply one drop of medium-strength blue Loc-Tite on the threads of each screw during installation. Align the index bumps on the back side of the washers with their corresponding slots on the plastic hinge spacer behind the shield; hold the washer carefully in position while you tighten the screw. A coin or short straight-slot screwdriver works great for this. DO NOT OVERTIGHTEN.

Description

This replacement part is a simple element that reduces wind noise and airflow inside the helmet by redirecting the wind that normally rushes into the helmet from under the chin bar.

Biltwell Bonanza Cheek Pad Set Biltwell ECE Gringo/Gringo S Cheek Pad Set Biltwell DOT Gringo/Gringo S Cheek Pad Set

Description

We offer removable cheek pads for our US DOT-compliant Bonanza helmet so you can replace old, dirty ones or fine-tune comfort with a thinner or thicker set depending on your preference.

Technical Details

  • Brushed fleece Lycra material wicks sweat from skin for greater comfort
  • Open-cell foam inside pads increases airflow and accelerates drying
  • Stainless-steel snaps on ABS plastic pad backing for speedy removal and installation
  • Hand-stitched construction
  • Available in different thicknesses for a custom fit—see chart in photos
  • Sold in pairs

Care and Maintenance

Never clean helmet comfort liner components in the washer or dryer. Instead, simply immerse them in soapy water and gently squeeze them to release dirt and oils. To dry, loosely wrap the wet pads in a plush towel and gently squeeze them to absorb excess moisture, then hang them to air dry. Wait 24 hours before reinstalling clean pads in your helmet.

Description

We offer removable cheek pads for our ECE-certified Gringo and Gringo S helmets so you can replace old, dirty ones or fine-tune comfort with a thinner or thicker set depending on your preference.

Technical Details

  • Brushed fleece Lycra material wicks sweat from skin for greater comfort
  • Open-cell foam inside pads increases airflow and accelerates drying
  • Stainless-steel snaps on ABS plastic pad backing for speedy removal and installation
  • Hand-stitched construction
  • Available in different thicknesses for a custom fit—see chart in photos
  • Sold in pairs

Care and Maintenance

Never clean helmet comfort liner components in the washer or dryer. Instead, simply immerse them in soapy water and gently squeeze them to release dirt and oils. To dry, loosely wrap the wet pads in a plush towel and gently squeeze them to absorb excess moisture, then hang them to air dry. Wait 24 hours before reinstalling clean pads in your helmet.

Description

We offer removable cheek pads for our US DOT-compliant Gringo and Gringo S helmets so you can replace old, dirty ones or fine-tune comfort with a thinner or thicker set depending on your preference.

Technical Details

  • Brushed fleece Lycra material wicks sweat from skin for greater comfort
  • Open-cell foam inside pads increases airflow and accelerates drying
  • Stainless-steel snaps on ABS plastic pad backing for speedy removal and installation
  • Hand-stitched construction
  • Available in different thicknesses for a custom fit—see chart in photos
  • Sold in pairs

Care and Maintenance

Never clean helmet comfort liner components in the washer or dryer. Instead, simply immerse them in soapy water and gently squeeze them to release dirt and oils. To dry, loosely wrap the wet pads in a plush towel and gently squeeze them to absorb excess moisture, then hang them to air dry. Wait 24 hours before reinstalling clean pads in your helmet.

Biltwell Lane Splitter Cheek Pad Set Biltwell Bonanza Helmet Liner Biltwell ECE Gringo/Gringo S Helmet Liner

Description

We offer removable cheek pads for our Lane Splitter helmet so you can replace old, dirty ones or fine-tune comfort with a thinner or thicker set depending on your preference.

Technical Details

  • Brushed fleece Lycra material wicks sweat from skin for greater comfort
  • Open-cell foam inside pads increases airflow and accelerates drying
  • Stainless-steel snaps on ABS plastic pad backing for speedy removal and installation
  • Hand-stitched construction
  • Available in different thicknesses for a custom fit—see chart in photos
  • Sold in pairs

Care and Maintenance

Never clean helmet comfort liner components in the washer or dryer. Instead, simply immerse them in soapy water and gently squeeze them to release dirt and oils. To dry, loosely wrap the wet pads in a plush towel and gently squeeze them to absorb excess moisture, then hang them to air dry. Wait 24 hours before reinstalling clean pads in your helmet.

Description

Restore that fresh out of the box feeling with a new liner and cheek pads. One interior comfort liner and two cheek pads are included with each kit, and installation is easy.

Technical Details

  • Hook and loop liner fastening
  • Brushed fleece Lycra absorbs and perspiration
  • Diamond stitch detailing
  • Cheek pads installs using button snaps
  • This liner kit only works with Bonanza helmets that have the comfort liner held in with Velcro. If yours is super old and glued in, it's time for a new lid!

Care and Maintenance

Never throw your helmet's liner and cheek pads in the washer or dryer. Instead, carefully remove the pieces and hand wash them in the sink with mild soapy water. Let them air dry 24 hours before reinstalling them to avoid dampness or mildew.

Description

Restore that fresh out of the box feeling with a new liner. Easily installs with a tabbed hook and loop securing system.

Technical Details

  • Hook and loop liner fastening
  • Brushed fleece Lycra absorbs and perspiration
  • Contrast diamond stitch detailing

Care and Maintenance

Never throw your helmet's liner in the washer or dryer. Instead, carefully remove the piece and hand wash it in the sink with mild soapy water. Let the liner air dry 24 hours before reinstalling it to avoid dampness or mildew.

Biltwell DOT Gringo/Gringo S Helmet Liner Biltwell Lane Splitter Helmet Liner

Description

Restore that fresh out of the box feeling with a new liner and cheek pads. One interior comfort liner and two cheek pads are included with each kit, and installation is easy.

Note: This kit is only for the older DOT Gringo and Gringo S helmets. If yours says "ECE R22.05" on the sticker on the back, it's too new. You'll need Part Number 0023-011-5701 for the more recent ECE/DOT Gringo and Gringo S helmets.

Technical Details

  • Hook and loop liner fastening
  • Brushed fleece Lycra absorbs and perspiration
  • Contrast diamond stitch detailing
  • Cheek pads installs using button snaps

Care and Maintenance

Never throw your helmet's liner and cheek pads in the washer or dryer. Instead, carefully remove the pieces and hand wash them in the sink with mild soapy water. Let them air dry 24 hours before reinstalling them to avoid dampness or mildew.

Description

Restore that fresh out of the box feeling with a new liner and cheek pads. One interior comfort liner and two cheek pads are included with each kit, and installation is easy.

Technical Details

  • Hook and loop liner fastening
  • Brushed fleece Lycra absorbs and perspiration
  • Contrast box stitch detailing
  • Cheek pads installs using button snaps

Care and Maintenance

Never throw your helmet's liner and cheek pads in the washer or dryer. Instead, carefully remove the pieces and hand wash them in the sink with mild soapy water. Let them air dry 24 hours before reinstalling them to avoid dampness or mildew.